Saitek RX600 Cordless Wheel (PS2)

Review

posted 12/9/2002 by John Yan
other articles by John Yan
One Page Platforms: PS2
Saitek has been releasing some nice quality products lately with cordless products for the Playstation 2 and the PC. Today I look at another cordless PS2 peripheral that falls short of being up to par with their recent releases. The RX600 cordless wheel from Saitek just doesn’t handle as well as it looks.

The RX600 is a cordless wheel that runs off of 4 AA batteries. Featuring 8 buttons, two levers for gas and brake, and a D-Pad, the RX600 has most of the buttons at your fingertips while driving. The D-Pad is positioned on the upper left part of the wheel while the four regular buttons in a triangle formation is placed on the upper right part of the wheel. On the back of the same areas are the L1 and R1 buttons. While the four primary buttons feature a good feel and spring, I thought the L1 and R1 buttons were a little too loose and felt flimsy. The D-Pad did feel pretty good during use and offered a nice comfortable feel and adequate resistance. The L2, R2, start, and select button are positioned on the inner connectors. They aren’t placed where they are easily accessible during gameplay but not many games use them so I didn’t find their placement to be bad.

Aesthetically, the wheel does look rather sleek with the black plastic and chrome like accent. On the top is a nice boomerang shape chrome design that goes around the battery compartment and the sides feature chrome air ports. The front of the wheel has a nice blue glowing Saitek symbol when the wheel is active and it is also surrounded by a chrome like finish. Where you normally grasp the wheel features a very comfortable rubber that makes it easy to hold onto the wheel. The wheel is also not very large and doesn’t take up a lot of room.

The table attachment doubles as a lap attachment so you can use your thighs to hold the wheel in place. While it doesn’t take the place of a table edge, holding the wheel on your lap isn’t that hard with the attachment. If you do want to attach the wheel to a table, you just tighten the one screw clamp and it holds the wheel securely in place. I did like the flexibility of using it either on the table or on your lap. Whereas the Logitech wheel made you change the attachment, the Saitek R600 allows you to keep the same one as it doubles in function.

Like most cordless products, you plug a receiver into the controller port on the PS2. The small receiver hangs out of the front with a rotating antenna. Since it only takes up one port, you can use two of these wheels together by doing a simple a simple calibration step on each wheel. I do like the size of the receiver and it doesn’t hang too far out in front when plugged in.

Since the set doesn’t include foot pedals, acceleration and deceleration are done by using the flipper pedals that are normally associated with shifting. Those who are used to using the flippers to shift will need to transfer the function over to the L1 and R2 buttons. The problem with the flippers is that there’s practically no way to do a gradual acceleration with them. When playing Gran Turismo 3 and Grand Theft Auto Vice City I had a horrible time trying to control my speed with the flippers. Trying to gradually accelerate is a practical impossibility as I was left with either no gas or the pedal to the metal. Also the tension on the flippers is really light making it even harder to try and control the acceleration. I had to resort to constantly pressing and releasing the flipper to accelerate without spinning the wheels on the tires. Yes, it was pretty frustrating trying to control the speed of the car.
Page 1 of 2