Logitech Harmony 680


posted 5/10/2005 by John Yan
other articles by John Yan
One Page Platforms: PC
The remote features the great SmartState technology that remembers what’s been turned on and off in your entertainment system. So when you press one of the activity buttons that change your setup, the remote will only power and adjust the settings if need be. For example, while watching TV I have all my video inputs into the receiver and a single video output that uses the Video 1 mode on my TV. Pressing the DVD button switches my receiver to DVD mode and that’s it. Now if all my components were turned off, pressing the DVD button would turn on the receiver, turn on the TV, switch the TV to Video 1, and switch the receiver to DVD. All in all, it’s a great way for people who are afraid of your system control it when they want to watch something else and not mess up your setup.

Because it’s Media Center ready, all the buttons control the Media Center out of the box. You’ll still need the USB receiver as the remote doesn’t come with one. But replacing the regular MCE remote, it’s ready right off the bat. I literally popped the remote out of the box, put in the batteries, and started changing channels and navigating through the menu system without any setup.

To program this remote, it’s exactly the same as the 688 that I wrote about in my earlier review. Here’s an except on how it’s done.

All of the programming is done via a web interface and by setting up an account on the Harmony website. Once done, you are taken through a wizard by selecting your components and what components do for each activity. The database at Harmony is pretty extensive and it even found the setup for my Hauppauge remote control for my PVR-250. So after answering a few questions and such, you plug the remote into your computer via a USB cable and a minute later, the remote is updated with all the codes and activities you have setup. I was pleasantly surprised to find everything worked on the first try. Without any programming, the remote controlled every device in my entertainment center. Talk about ease of use and a very high WAF (Wife Acceptance Factor).

If you do have to program the remote, the bottom of the remote features an IR reader. You point the remote you want to record there and setup the name of the command through the web interface. The eye to record IR commands sits on the bottom of the remote, opposite of the IR transmitter. Now what makes the Harmony 680 really cool is that you can assign any command to any key easily through the web utility. Each button has a dropdown box next to it with a list of commands and you can assign it to. Using a web interface to setup the remote makes it a whole lot easier than trying to do it with the remote itself.

What I didn’t find though was if you had two remotes, how to distinguish which one you were programming. I couldn’t tell the web application that I had a different remote I was programming. I do suggest registering the remote with another email address but hopefully Harmony will update the site so you don’t have to have separate emails for each Harmony remote you have.

Using the remote for the past month, I did find it to be comfortable and I do enjoy the button scheme a little more than the 688. It doesn’t have as many buttons to program but what it lacks in number of buttons to program can be made up for by adding them to the LCD screen. I had no problems controlling any of my components with the 680 and do enjoy using this one over the regular MCE remotes that you can purchase. If you have your MCE machine connected to many components, then this remote will make it pretty easy for you to control it all.

It’s a great replacement remote if you have many components connected along with a MCE setup. Otherwise, I’d go with one of the other models. I do like the shape and feel of the Harmony 680 and the button layout more than the 688. The fact that there are some distinctive shapes to the buttons helps out a lot. While it is pre-configured to work with MCE out of the box, I don’t see anyone buying this remote without doing some customizations themselves. All in all, it’s a good remote and $50 cheaper than the 688 with close to the amount of buttons to program.

It's an easy remote to operate along with being Media Center compatible out of the box.

Page 2 of 2